TAYBO TB-CWM | Dual-Source Chiller for AI Data Centers

TAYBO TB-CWM | Dual-Source Chiller for AI Data Centers

Meet the TAYBO TB-CWM, an air-cooled, dual-source chiller designed for modular and AI data centers. As each new block of compute adds heat, this video shows how the TB-CWM combines gravity heat-pipe free cooling with mechanical refrigeration in a single 40-ft high cube module. An exploded view walks through the unit layer by layer: an axial fan deck with 16 fans, 8 banks of V-bank heat exchangers, and hydronic heat exchangers and refrigerant pipework connected to an oil-free centrifugal compressor. At operating speed, a thin gas film supports the compressor shaft, so the air bearings need no lubricating oil. In cool weather, the gravity heat-pipe circuit works as a two-phase thermosyphon: refrigerant absorbs heat from the return fluid, rises as vapor, condenses in the outdoor coil and flows back under gravity. When this circuit meets the load, the compressor can stop while fans and pumps keep running. As outdoor temperatures rise, mechanical cooling takes over to hold the supply temperature target. The video also shows how the TB-CWM connects to GPU liquid cooling, from cold plates through the CDU to outdoor air. Warmer facility supply temperatures can extend free-cooling hours, reducing compressor runtime to help improve site PUE, while dry heat rejection avoids water evaporation at the chiller to help lower site WUE. The reference model TB-CWM1750C-800F delivers 1.75 MW of mechanical cooling or 800 kW of free cooling at ΔT ≥ 15°C, and a single module can be configured for up to 2 MW (about 569 US RT) of mechanical cooling. Actual capacity depends on the selected operating point and site conditions. Watch the full video to see how TAYBO builds cooling that scales with compute, with energy and water in mind.