Two Cooling Modes, One Integrated Solution: Meet the TAYBO TB-CWM1750C-800F Dual-Source Chiller
Meet the TAYBO TB-CWM1750C-800F Dual-Source Chiller, an integrated data center cooling solution combining oil-free air-bearing compression with gravity heat-pipe free cooling.
Designed to take advantage of favorable ambient conditions while providing mechanical cooling when required, the system offers:
High-Capacity Mechanical Cooling
A reference cooling capacity of 1,750 kW at 440 kW input delivers a calculated COP of approximately 3.98.
Free Cooling with Reduced Compressor Runtime
When ambient conditions permit, gravity-driven refrigerant circulation transfers heat to the outdoor air while the compressor remains off. Free-cooling capacity is rated at 800 kW at ΔT ≥ 15°C, helping reduce cooling energy consumption.
Oil-Free Air-Bearing Technology
During normal operation, a gas film supports the rotating shaft, eliminating the need for bearing-oil lubrication and preventing mechanical contact within the bearing.
Integrated, Modular Design
V-bank heat exchangers, axial fans, the compressor, and controls are combined in one coordinated assembly, simplifying system integration and supporting modular cooling-plant configurations.
Practical System Connectivity
DN250 bottom inlet and outlet connections, RS485 communication, and an IP55 enclosure rating support integration with project cooling and monitoring systems.
Refrigerant options include R134a, R513A, and R1234ze, with equipment selection tailored to project requirements. Contact our team to discuss your next data center project.
Performance figures are based on the R513A reference specification. Mechanical-cooling and free-cooling capacities are separate operating-mode ratings and are not additive. Actual performance varies with refrigerant selection and operating conditions. Fans and external pumps continue to consume power during free-cooling operation.
